AWS: ENiCrFe-3 WELDING ELECTRODES
Product data sheet / Overview: (INCONEL 182 /ALLOYS 182 / INCONEL alloys 600 and 601)
ENiCrFe-3 is a nickel-chromium-iron electrode used for welding a variety of nickel-chromium-iron alloys to themselves, dissimilar welding between these alloys and steels or stainless steels, and surfacing applications. It offers good weldability, machinable weld deposits, and excellent performance at cryogenic to moderate temperatures (around 900°F).
Specifications
- American Welding Society (AWS) Classification: ENiCrFe-3
- ISO: E Ni 6182 (NiCr15Fe6Mn)
- Conforms to standards:AWS A5.11, ASME SFA 5.11 (typical)
Chemical Composition (%)
| Element | Typical % |
|---|---|
| Nickel (Ni) | 65 |
| Chromium (Cr) | 15 |
| Iron (Fe) | 8 |
| Manganese (Mn) | 7.5 |
| Columbium + Tantalum (Nb + Ta) | 2 |
Note: The specific chemical composition can vary slightly between manufacturers.
Mechanical Properties
- Yield Strength:: Not always specified, refer to manufacturer's data sheet for specific values.
- Tensile Strength: Not always specified, refer to manufacturer's data sheet for specific values.
- Elongation: Not always specified, refer to manufacturer's data sheet for specific values.
- Impact Strength: Data typically available at room temperature (20°C) and may be specified in Charpy V-notch impact values. Refer to manufacturer's data sheet for details.
Applications
-
Welding nickel-chromium-iron alloys to themselves.
-
Dissimilar welding between nickel-chromium-iron alloys and steels or stainless steels.
-
Cladding steel with nickel-chromium-iron weld metal (when high manganese content is not detrimental).
-
Surfacing applications.
-
Applications requiring good performance at cryogenic to moderate temperatures (around 900°F).
-
Examples: Desalination plants, petrochemical facilities, power generation plants, furnace equipment, and piping.
Storage and Handling
- Store in a dry place away from moisture and contaminants.
- Maintain recommended storage temperature as specified by the manufacturer.
- Follow proper handling procedures to avoid damage to the electrode coating.
Safety Precautions
- Welding fumes and gases can be hazardous. Use proper ventilation and wear appropriate personal protective equipment (PPE) such as welding helmet, respirator, gloves, and flame-retardant clothing.
- Electrodes can be sharp. Handle with care to avoid cuts.
- Follow all safety guidelines established by AWS and OSHA.
Manufacturers
- ESAB
- Special Metals
- Lincoln
- Bohler/ UTP
- Daiko
- Selectarc
Product Name
Brand
Product Name
Special Metals INCONEL Welding Electrode 182 BOHLER Thermanit Nicro 182 UTP UTP 7015 ESAB OK NiCeFe-3 Lincoln Tech-rod® 182 Selectarc SELECTARC Ni181 Daiko Daiko 182
**Disclaimer:
Mechanical Properties
- Yield Strength:: Not always specified, refer to manufacturer's data sheet for specific values.
- Tensile Strength: Not always specified, refer to manufacturer's data sheet for specific values.
- Elongation: Not always specified, refer to manufacturer's data sheet for specific values.
- Impact Strength: Data typically available at room temperature (20°C) and may be specified in Charpy V-notch impact values. Refer to manufacturer's data sheet for details.
Applications
- Welding nickel-chromium-iron alloys to themselves.
- Dissimilar welding between nickel-chromium-iron alloys and steels or stainless steels.
- Cladding steel with nickel-chromium-iron weld metal (when high manganese content is not detrimental).
- Surfacing applications.
- Applications requiring good performance at cryogenic to moderate temperatures (around 900°F).
- Examples: Desalination plants, petrochemical facilities, power generation plants, furnace equipment, and piping.
Storage and Handling
- Store in a dry place away from moisture and contaminants.
- Maintain recommended storage temperature as specified by the manufacturer.
- Follow proper handling procedures to avoid damage to the electrode coating.
Safety Precautions
- Welding fumes and gases can be hazardous. Use proper ventilation and wear appropriate personal protective equipment (PPE) such as welding helmet, respirator, gloves, and flame-retardant clothing.
- Electrodes can be sharp. Handle with care to avoid cuts.
- Follow all safety guidelines established by AWS and OSHA.
Manufacturers
- ESAB
- Special Metals
- Lincoln
- Bohler/ UTP
- Daiko
- Selectarc
Product Name
| Brand | Product Name |
|---|---|
| Special Metals | INCONEL Welding Electrode 182 |
| BOHLER | Thermanit Nicro 182 |
| UTP | UTP 7015 |
| ESAB | OK NiCeFe-3 |
| Lincoln | Tech-rod® 182 |
| Selectarc | SELECTARC Ni181 |
| Daiko | Daiko 182 |
The information provided here is for general informational purposes. While we strive for accuracy, we make no warranties about the completeness, accuracy, or suitability of the information. Any reliance you place on such information is at your own risk. Third-party trademarks (including logos, Product names, and icons) referenced here belong to their respective owners. References are for informational purposes only and do not imply endorsement.
ENiCrFe-3 Inconel 182 welding electrode (SMAW) supplier in Dubai, Abu Dhabi, Sharjah, Al Ain, Rak, Fujairah UAE, Oman, Saudi Arabia (KSA), Qatar, Kuwait & Bahrain