AWS E316L MIG Wire and TIG Rods
Specification:
AWS Classification: E316L
Process: MIG (GMAW) and TIG (GTAW) Welding
Applications:
- Food and beverage industry equipment
- Pharmaceutical and chemical processing equipment
- Marine and coastal applications
- Pulp and paper industry equipment
- Architectural and decorative applications
Chemical Composition (wt%):
| Element | C | Si | Mn | P | S | Cr | Ni | Mo |
|---|---|---|---|---|---|---|---|---|
| Content | ≤0.03 | ≤1.00 | 1.0-2.5 | ≤0.03 | ≤0.03 | 16.0-18 | 10.0-14 | 2.0-3.0 |
Mechanical Properties:
| Property | Tensile Strength | Yield Strength 0.2% Offset | Elongation | Charpy V-notch Impact Value |
|---|---|---|---|---|
| As-Welded | 550 MPa (80 ksi) | 380 MPa (55 ksi) | ≥30% | ≥ 40 J (30 ft·lbf) |
| Post-Weld Heat Treated* | 620 MPa (90 ksi) | 450 MPa (65 ksi) | ≥25% | ≥ 50 J (37 ft·lbf) |
* Post-Weld Heat Treatment: Solution annealing at 1010-1150°C (1850-2100°F), followed by rapid quenching.
Other Details:
- Wire Diameter Range: 0.8mm - 2.4mm (0.030" - 0.094")
- Shielding Gas: 98% Argon, 2% CO2 (MIG welding)
- Polarity: Direct Current, Straight Polarity (DCSP) for MIG welding
- Clean and dry the base material before welding
- Suitable for welding similar and dissimilar stainless steels
BRANDS AVAILABLE IN AWS E316L MIG Wire and TIG Rods
ESAB, BOLHER, LINCOLN, KISWEL, SUPERON, GEKA, DAIKO, D&H, WB ALLOYS
**Disclaimer:The information provided on this website is for general informational purposes only. While we strive for accuracy, we make no warranties or representations regarding the completeness or suitability of the information, and any reliance you place on it is at your own risk. We operate as independent traders and distributors. All third-party trademarks (including logos, product names, and icons) referenced are the property of their respective owners and are used strictly for identification and reference purposes. Such references do not imply any sponsorship, endorsement, or official affiliation. We disclaim all liability for any damages arising from the use or misuse of the information provided.