AWS ER308LSi MIG Wire and TIG Rods

Specification:

AWS Classification: ER308LSi
Diameter Range: 0.023" (0.6 mm) to 0.045" (1.2 mm) for MIG wire; 0.040" (1.0 mm) to 1/8" (3.2 mm) for TIG rods

Applications:

Suitable for welding austenitic stainless steels of similar composition
Commonly used in applications where the joint will be exposed to corrosive environments
Widely used in industries such as food processing, chemical, and petrochemical

Chemical Composition (wt%):

Mechanical Properties (Typical):

Other Details:

ER308LSi MIG wire and TIG rods are designed for welding low carbon 18% Cr - 8% Ni stainless steels
The "L" in ER308LSi stands for low carbon, which reduces the possibility of carbide precipitation and sensitization during welding
These consumables offer excellent corrosion resistance and good mechanical properties
Welding procedures should be followed as per AWS recommendations and material specifications
Suitable shielding gas for MIG welding: 98% Ar + 2% CO2 or pure Ar
TIG welding should be carried out with high-purity argon gas

BRANDS AVAILABLE IN ER308LSi MIG Wire and TIG Rods

ESAB, BOLHER, LINCOLN, KISWEL, SUPERON, GEKA, DAIKO, D&H, WB ALLOYS

Major export to countries and cities:

**Disclaimer:

The information provided here is for general informational purposes. While we strive for accuracy, we make no warranties about the completeness, accuracy, or suitability of the information. Any reliance you place on such information is at your own risk. Third-party trademarks (including logos, names, and icons) referenced here belong to their respective owners. References are for informational purposes only and do not imply endorsement.